Installation, Use and Maintenance Manual - CFR micro / CFR micro E Series
page 27
• Spare parts must correspond to the requirements defined by the SIC srl Company.
• In case of dismantling of the unit, follow the relevant antipollution norms.
N.B. When using the unit, the installer and the user must take into account and place remedy to all the other types of risk connected with the
sistem. As an axample risks deriving from entry of foreign bodies, or risks deriving from the conveying of dangerous gases that are inflamma-
ble or toxic at high temperature.
3.3 Preliminary operations
.
• Check the perfect integrity of all components.
• Check that in the packing all the accessories for the installation and the relevant documentation, are included.
• Transport the packed section as close as possible to the installation place.
• Do not put tools or weights over the packed unit.
3.4 Choice of the installation place
• Place the unit on a solid structure that shall not causes vibrations and that is solid enough to support the weight of the machine.
• Do not place the unit in rooms where inflammable gases, acids or aggressive and corrosive substances may be present. These could dama-
ge the different components in an irreparable way.
• Foresee a minimum free space as shown on the figure, to make possible the carrying of the ordinary and extraordinary maintenance.
MINIMUM FREE SPACE FOR
CHECKING AND MAINTE
-
NANCE
450 mm
TOP
CEILING
page 27
Installation, Use and Maintenance Manual - CFR micro E Series
Model CFR microE
25N
35N
50N
80N
100N
A (mm)
320
320
450
450
450
English
