6
CONTROLS
The Navigation Controller
The controller is used to select a function or to change a
setting of Smart Tweezers. The controller can be moved
(rocked) in 4 directions (UP, DOWN, LEFT, RIGHT). Selection
is performed by pressing along the vertical axis (PRESS).
Quick Controls
The Quick Controls allow changing test parameters or modes
without entering the general menu by moving the Navigation
Controller UP, DOWN, LEFT and RIGHT as shown below.
The following table summarizes functions of
the Navigation Controller moves:
UP
– change test signal levels
DOWN
– change test ranges
LEFT
– change measurement modes
RIGHT
– change test frequencies
Note:
To avoid errors do
not use the Quick Controls
during component
measurement. The
Navigation Controller
response time depends on
the current test frequency.
