12
The mode could be used for locating shorted part of a circuit e.g. on a PCB.
DISPLAY MENU
Display menu is used to change display’s settings
• Select RIGHT to set the “Right Handed” display mode
• Select LEFT to set the “Left Handed” display mode
CONTRAST
Select CONTR to adjust display contrast. Move Navigation
Controller UP or DOWN to change contrast. PRESS
to exit menu at the adjusted contrast level.
TIME OUT
Select TIMEOUT to adjust the timeout before the unit goes to
sleep mode. Move Navigation Controller UP or DOWN to change
the timeout value (10sec – 200sec) PRESS to exit the menu..
SERVICE MENU
DISPLAY MENU
Display menu is used to change display’s set
CONTRAST
SelectCONTRtoadjustdisplaycontrast Mov
TIME OUT
Select TIMEOUT to adjust the timeout befor
SERVICE MENU
