7
PORTABLE SELECTIVE MICROPROCESSOR METAL DETECTOR MOLE
In MOLE operating manual there is an information,
necessary for its proper exploitation (operation, technical
maintenance, transportation). Operation rules cover the total
period of the device exploitation.
Deconservation of the device is performed in the following
sequence:
1). Remove manufacturer’s seals from the case locks;
2). Check the availability of all components according to Article
4. of the present technical description;
3). Perform external examination.
The device has the following bodies of control, setup and
indication (fig. 2):
1. «MENU»
button
(«On»
) – entering to the setup mode and
shifting to the next parameter, or switching on the device at
first pressing.
2. «COMP»
button (
«
<
»
) – operative ground compensation,
or at the setup mode, decreasing the parameter.
3. «MODE»
button (
«
>
»
) – in the standard operating mode -
standard mode or the mode of defining the size and the distance
to the object; in the special operating mode - special mode or
the mode of defining the size and the distance to the object; in
the setup mode, increasing the parameter.
4. «SENS»
button (
«Off»
) – selecting the sensitivity level or,
at the setup mode, exit from it.If the button is kept pressed for
2 seconds, the device will switch off.
3. Control,
setup and
indication
bodies
1.
Introduction
2.
General
instructions
fig.3
fig.4
O P E R A T I N G
M A N U A L
fig.2
fig.5
