Sibel MOLE, Operating Manual

Page: 10 / 19

PORTABLE SELECTIVE MICROPROCESSOR METAL DETECTOR MOLE
10
Next pressing the «MENU» button causes «Backlight off »
(fig. 8) or «Backlight on » pictogram at LCD. In this case the
storage battery will be discharging for 30% quicker (fig. 9). With
the help of
« < » and « > » buttons user may switch on/off the
LCD backlight.
At next pressing the «MENU» button «Ground: normal»
pictogram appears at LCD (fig.22).With the help of «<» and
«>» buttons user may set one from three («Heavy»,«Normal»,
«Light») types of the ground and, correspondingly, suppression
level of ground mineralization influence.
Next pressing the «MENU» button causes «Frequency:...»
pictogram at LCD (fig. 23). With the help of «<» and «>»
buttons user may set one from three (MIN, NOM, MAX)
operating frequencies.
After next pressing the «MENU» button, device comes to
operating mode. In order to set the particular parameter, user
should press the
«MENU» button required number of times. To
quit the «MENU» mode at any moment user should press the
«SENS» button.
To define the size and the distance to detected object, the
device should be switched to appropriate mode (fig. 24) with the
help of the
«MODE» button.
At pressing the “COMP ” button, “Ground compensation”
pictogram (fig. 10) appears at LCD. After that during several
seconds it is necessary to move the search head above the ground
area, free from metal objects, untill the device comes in operating
mode. In case of proper compensation, while further moving of
the search head above the ground the audio alarm should be
absent.
At the right bottom corner there is a triangle. After switching
on it is half-filled that corresponds to the average sensitivity. After
pressing the
«SENS» button, sensitivity will be minimal (the
triangle will be minimum-filled). At next pressing the sensitivity
will be maximal (the triangle will be filled completely). After next
pressing the button the sensitivity comes back to its average level
(the triangle is half-filled). Further process of the sensitivity
changing is the same.
At the left bottom corner of LCD there is a symbolic
picture of storage battery. Its filling point corresponds to its voltage
(8.2 V – fully filled, 6.0 V – unfilled). In the mode of defining the
size and the distance to to the object at the left upper corner of
fig.18
O P E R A T I N G M A N U A L
four (MIN, NOM, MAX, AUTO) levels of sensitivity to ground
discontinuity.
fig.19
fig.20
fig.21
fig.23
fig.22