14
5 Menus
The following describes the parameters that can be set or confirmed in respective flow
calibrator menus.
5-1 Main
Screens
The current air pressure
*1
and temperature can be confirmed by pressing the
[MODE/ESC] key in the flowrate measurement screen.
Flowrate Measurement Screen
Pressure Sensor Display
*1
[MENU] Screen
Temperature Sensor Display
Note: It is possible to check the pressure and temperature even while measuring the
accumulated and average flowrate.
*1 The atmospheric air pressure is indicated when no air is flowing, but the reference
pressure (absolute pressure) at the flow calibrator air intake port is indicated if air is
flowing.
A kPa is one tenth of a hPa.
LCD Screen
Status
Flashing
ON
(steady)
