7
The ID number is any number between 1 & 2000. The
PIN is any four digits between 0000 & 9999 with the
exception of 1234 which is reserved. Users can be added
continuously without exiting programming mode as
follows:
1 User ID no 1 # PIN # User ID no 2 # PIN #
To delete a
PIN
user
2 User ID number #
Users can be deleted continuously without exiting
programming mode
To change the
PIN
of a PIN user
(This step must be done out of
programming mode)
* ID number # Old PIN # New PIN # New PIN #
To add a
card
user (Method 1)
This is the fastest way to enter cards,
user ID number auto generation.
1 Read card #
Cards can be added continuously without exiting
programming mode
To add a
card
user (Method 2)
This is the alternative way to enter cards
using User ID Allocation. In this method a
User ID is allocated to a card. Only one
user ID can be allocated to a single card.
1 ID number # Read card #
User can be added continuously without exiting
programming mode
To add a
card
user (Method 3)
Card number is the last 8 digits printed
on the back of the card,user ID number
auto generation
1 Card number #
User can be added continuously without exiting
programming mode
To add a
card
user (Method 4)
In this method a User ID is allocated to a
card number. Only one user ID can be
allocated to the card number
1 ID number. # Card number. #
User can be added continuously without exiting
programming mode
To delete a
card
user by card. Note users
can be deleted continuously without
exiting programming mode
2 Read Card #
To delete a
card
user by user ID. This
option can be used when a user has lost
their card
2 User ID #
Summary of Contents for Standalone Keypad Access Control
Page 1: ...Standalone Keypad Access Control User Manual...
Page 10: ...10...
