e015x DA15Kx
User guide (v.02)
pag.19
Printed in
e015-di DA15K [Eng].docx
Siap+Micros S.r.l.
5 Operating conditions
The equipment has been designed to be used according to the specifications given in the following table:
INTENDED USE AND
LIMITATIONS OF THE
EQUIPMENT
DATA / AVAILABLE INFORMATION
Intended use
The intended use includes only measures of physical and chemical
parameters for meteorology, agricultural meteorology, hydrometry,
climate and environmental monitoring, remote control and automation
of aqueducts, treatment plants, sewers, etc., control systems and
automation in distributed logic control for special applications such as
landslides, chemicals or microbiological processes, etc.
Reasonably foreseeable misuses
and contraindications of use
It is not correct to use in domestic environments or for unprofessional
purposes; use by unqualified persons and / or not properly educated.
Operative environment
It is not intended to be used in the presence of gases or fumes corrosive
and flammable.
Any critical environmental factors
The environmental conditions for correct use are:
-
Reference temperature: 20° C
-
Temperature of use: -30 +80 °C
-
Maximum relative humidity allowed: 100% uncondensed
-
Storage Temperature: -30 +80 °C
-
Storage Humidity: 90%
Professionalism or experience
required for operators
The staff must be qualified or properly trained and informed about the
risks which can be run.
Determination of the expected "life
span" of the equipment and / or
some of its components taking into
account the intended use
The peripheral stations and components used are of robust construction
and durable. All components are replaceable and/or repairable, it is not
expected a time limit of use. However, specific maintenance
interventions are scheduled, and possibly replacement, according to a
predetermined cadence, for all the components, in relation to the
alleged deterioration or breakage of some parts which constitute them.
Space limitations
The peripheral stations do not have any moving parts, therefore any
fence in the area is not necessary for the safety of people. May be
requested by the customer to prevent any alteration.
Installation of the peripheral stations is done directly by the
manufacturer. Customer shall provide, upon installation, the delivery
point of electricity power and an area which can comply with the
requirements.
REMARKS
•
Periodic updates of this document are released and available on demand.
•
The manufacturer may update the product described in this document, or parts of it, at any time without notice.
•
It is not allowed reproduce or duplicate, entirely or part of this document without the permission of SIAP+MICROS srl.