e015x DA15Kx
User guide (v.02)
pag.11
Printed in
e015-di DA15K [Eng].docx
Siap+Micros S.r.l.
2 Using DA15K data logger
2.1 Turning on the DA15K data logger
Turning on the DA15K data logger is easy, just push on the switch placed in the acquisition section. Suddenly,
the 2 red LEDs are turned ON and few seconds later the V Batt LED start to flash, and this shows the battery
level related to Voltage detected (1 flash
empty
, 5 flashes
full).
Few seconds later turning on the display, bootstrap mask with label “SIAP+MICROS” will appear.
30s later, Windows CE 6.0 O.S. will start to run and the applications placed in the directory
“
\NandFlash\Windows\StartUp
” will start.
Thus, the following mask will appear (showed measures depends upon the configuration):
Notice that the title and release of the program may change in time.
