e015x DA15Kx
User guide (v.02)
pag.17
Printed in
e015-di DA15K [Eng].docx
Siap+Micros S.r.l.
4 Regulations
4.1 Safety Regulation
This document is collecting all the technical documentation to demonstrate that this product fulfills all the
essential safety requirements given by the guidelines applicable to it.
The detailed examination of the project and the means of implementation allowed us to establish what are the
risks that the product may present throughout his life, if properly used, and then to define the essential
requirements which are applicable to it. These requirements may be contained in one or more guidelines and
all must be met. For the application of a directive to a product then two conditions are required:
The product falls within its scope;
The product presents risks to which the essential requirements of the Guideline refers.
From risk analysis conducted, described in the following pages, it arose that the European directives applicable
to the product in question are as follows:
Main Guideline
Additional or
Variation Guideline
Title
Reference
transposition law in
Italy
73/23/CEE
93/68/CEE
Low Voltage Guideline
L. 791/77; D.Lgs 626/96;
D.Lgs. 277/97;
89/336/CEE
93/68/CEE
92/31/CEE
Electromagnetic Compatibility
Guideline (EMC)
D.Lgs. 615/96
This product falls within the scope of the Low Voltage guideline 73/23 / EEC implemented in Italy by Law
791/77, since some of its components fall within the definition of art. 1:
“The disposition of this law shall apply to electrical equipment intended for use with a nominal voltage rating of
between
50 and 1,000 volts AC and between 75 to 1500 Volt DC, with the following exceptions:
a) electrical equipment intended for use in environments exposed to explosion hazards;
b) electrical equipment for radiology and clinical use;
c) electrical parts of lifts and elevators;
d) electric meters;
e) plugs and socket for domestic use;
f) power devices of electric fences;
g) Material in respect of radio interference;