9
8
Viii - PrePArinG tHe cLADDinG
iX - cLADDinG
➊
Fasten the PSE template (d) on the access trap
using two grey screws which can be found in the
control panel box
➋
Fit the caps (f) and (g) on the supply bend (e) and
on the drain pipe as well as the flexible sheaths
(i) over the attaching rods of the toilet bowl (l)
The thickness of the cladding must be between 20 and 100 mm (for
the front) and 25 and 60 mm (for the top) and must be firmly attached
to the building structure.
Cladding can be of various materials (brick, plaster blocks, plaster board,
water repellent wood panels etc).
Cut the various holes (control panels and drain and supply of toilet bowl
and toilet bowl attaching holes). There is a cutting template included on
the back of the package.
d
f
g
