28
Control AC(110v) 485 - with 3rd party via Serial
There are several options to control a Solo 2 485 screen
with 3rd party controls. To integrate with your preferred
solution see the corresponding programming guide and/
or the system manufacturers instructions.
Note: To
change the programming (lower limit) you will need
either a DecoSet or IP Controller.
• For connection to your control system with an IP
Controller refer to pinout image (pg 20). Then use your
control system's programming guide to send
commands to control the screen. For further integration
help call support at 512.832.6939.
485 Screen
485 Serial Conductors (refer to pg 5)
Computer or
Control system
with serial port
CONTROL AC(110v) 485 WITH
3RD PARTY - VIA SERIAL
