26
Programming AC(110v) 485 - with IP Controller
1. Launch Windows File Explorer
2. Click on the “Network” tab
3. Double click on the IP Controller, the default web
browser will launch.
Skip to Pg 24 if you have TRO.Y
4. For the UAI+/SI.FI - At the landing page, click the three
lines in the top right corner, then click “Settings”
5. Select the “SDN” tab on the top left
6. Press the spyglass to auto discover motors on the
485 network (may have to press it more than once)
7. Click on the motor you want to program
8. Name the motor
9. Right click on the down limit count
10. Move the screen up or down using the buttons in the
popup window
11. Click set to confirm the limit
12. Operate the screen up and then back down to verify
the position of the limit.
If you are done,
Skip pg 24.
