12
Pressing UP will send
motor to the Upper limit.
- Pressing STOP will stop
any motor movements.
- Holding STOP will send
motor to first IP (if set).
Pressing DOWN will send
motor to the Lower limit.
The command status LED will flash once per movement (button
press) or in other words for each command sent to motor.
SET UPPER
SET LOWER
REVERSE
UP
DOWN
STOP
DECOSET MOVEMENT
COMMANDS (WHITE BUTTONS
& LED)
- Pressing will send
small movement down
to motor.
- Holding will
continuously move motor
down.
- Releasing will stop
the motor down motion.
- Pressing will send small
movement up to motor.
- Holding will continuously
move motor up.
- Releasing will stop
the motor up motion.
Decoset Movement commands (white buttons & LED)
