Si-tex SP-110C, User Manual

Page: 19 / 42

Minimum Speed
(Requires GPS)
Only used when no rudder
feedback SOG installed
Factory default setting is 1.0km
and should only be altered during
sea trials
• With Main Screen displayed
(Figure 8)
• Hold MODE button, Settings
Page 1 will appear (Figure 9)
•
Press ► to scroll down
to
MINIMUM SPEED
• Press AUTO to edit MINIMUM
SPEED
•
Press ► to increase setting
(higher
minimum speed)
•
Press ◄ to decrease setting
(lower
minimum speed)
• Press MODE to return to Settings
Page 1
• Press MODE to return to Main
Screen
Backlight Bright
Factory default setting is 15
(Maximum Brightness)
• With Main Screen displayed
(Figure 8)
• Hold MODE button, Settings
Page 1 will appear (Figure 9)
•
Press ► to scroll down
to
BACKLIGHT BRIGHT
• Press AUTO to edit BACKLIGHT
BRIGHT
•
Press ► to increase
setting
(Brighter screen)
•
Press ◄ to
decrease setting
(Darker screen)
• Press MODE to return to
Settings Page 1
• Press MODE to return to Main
Screen
Wind Mode
(Requires MWV NMEA
data input)
Factory default setting is OFF
• With Main Screen displayed
(Figure 8)
• Hold MODE button, Settings
Page 1 will appear (Figure 9)
•
Press ► to scroll down
to
WIND MODE
• Press AUTO to edit WIND MODE
•
Press ► to enable Wind
Mode
•
Press ◄ to disable Wind
Mode
• Press MODE to return to Settings
Page 1
• Press MODE to return to Main
Screen
16 of 35 SI-TEX SP-110C
Note: This setting is useful for
adjusting screen brightness for day
/ night or low lit areas.
Note: When Wind Mode is ON, the
SP-110C will attempt to correct for
wind effects on vessel steering.
Note: When the vessel is below
this set speed and in Auto or GPS
mode, the SP-110C will revert
back to Manual mode.