All Rights Reserved
Shyam Telecom Limited Page
12/34
Next Generation
Signal Enhancement
Figure 3: Login Repeater
II) CONFIGURATION (Figure 4)
Configuring system means setting the parameters for operation as per the
requirement at site. The configuration is carried out after the physical
installation is completed.
Click on the command bar to display the configuration and monitoring
window, which allows access to all the configurable repeater parameters.
User can login for configuration & monitoring of repeater parameters.
•
START
command is for initiating the dialogue.
•
SET
command is for updating the repeater parameters.
Information as detailed below, is configured after the
“CONFIGURATION”
window is activated:
i. Repeater ID:
User can assign a unique repeater ID to each repeater
installed. Up to 10 characters are allowed in this field.
ii. Repeater Location:
User can assign the address of location where
repeater is installed. Up to 30 characters are allowed in this field.
iii. Sub Bands (UL/DL Frequency Bands):
The frequency bandwidth
with frequency details, of the loaded sub band in UL & DL paths are
specified.
