All Rights Reserved
Shyam Telecom Limited Page
11/34
Next Generation
Signal Enhancement
6. To Get started-Basic Software Control Of the System
6.1. General
The system is equipped with a supervisory module that allows the monitoring
and control of various parameters such as RF power, attenuation,
temperature, status of door and alarm conditions etc.
The communication interface between the local terminal and the control
module can be set up using the Configuration & Monitoring Console software
(CMC), which is an easy to use GUI for simple control and monitoring. This
way, the parameters can be easily observed and adjusted from the display
terminal.
This can be performed either via a terminal (PC/laptop) locally, or via remote
login through the wireless modem (Optional) located in the repeater. USB
port is provisioned in the equipment for connecting PC/laptop.
6.2. Terminal Set-up
The system is delivered with software loaded in order to perform
configuration as per requirement. It also enables monitoring the status.
Configuration of parameters can be carried out locally with the help of laptop
/ PC connected to the repeater by means of local USB serial interface or
remotely via wireless modem (Optional) mounted inside the repeater. The
laptop/PC should be loaded with the CMC software available on the supplied
CD along with the USB driver.
I) LOGIN Repeater
After
running the
Configuration & Monitoring Console
(CMC), user needs
to login the repeater, sequence as under, may be followed:
•
Click the “
LOGIN
” on the command bar.
•
Select the user type (ADMINSTRATOR or SUPERVISOR).
•
Enter the password.
•
Finally click the “
OK
”.
A message “
Logged in successfully
” will appear on the screen after
successful login. There are two types of users viz.
ADMINISTRATOR
and
SUPERVISOR
. If user logged in as an
ADMINISTRATOR
, all the
functions can be performed through the CMC. By default, the password
for both users is
“SHYAM”.
SUPERVISOR
is allowed to perform monitoring of the status & alarms but
no change in configuration is permitted. However, the
SUPERVISOR
can
change password if so desired.