Page
All Rights Reserved Shyam Telecom Limited 22/36
Next Generation
Signal Enhancement
SET
: This is for updating the repeater parameters.
READ
: This is for reading configured parameters from repeater.
Figure 4: Repeater ID Setting
a) Repeater ID (Figure 4)
User can assign a unique repeater ID to each repeater installed. Up to
10 characters are allowed for this field.
b) Repeater Location (Figure 4)
User can assign the address of location where repeater is installed. Up
to 30 characters are allowed for this field.
c) Sub Band ON/OFF Setting (Figure 5)
The sub band equipped can be set as ON others shall remain OFF.
d) Frequency Settings (Figure 6)
The frequency band of the sub band equipped is specified for DL path.
