.
Page
All Rights Reserved
Shyam Telecom Limited
12/43
Next Generation
Signal Enhancement
T
his function can be performed either using a terminal
(PC
/laptop
)
locally, or
through remote login using the wireless modem
(O
ptional
)
located in the
repeater.
USB
port is provisioned in the equipment for connecting
PC/
laptop.
6.2. T
erminal
S
et-up
T
he system is delivered with software loaded in order to perform
configuration as per requirement.
I
t also enables monitoring the status.
Configuration of parameters can be carried out locally with the help of laptop /
PC
connected to the repeater by means of local USB serial interface or
remotely via wireless modem
(Optional)
mounted inside the repeater.
T
he
laptop/
PC
should be loaded with the
CMC
software available on the
supplied
CD
along with the
USB
driver.
I)
L
ogin
R
epeater
(F
igure
3)
A
fter running the
C
onfiguration
&
M
onitoring
C
onsole
(CMC)
, user needs
to login the repeater, sequence as under, may be followed:
•
Click the
“LOGIN”
on the command bar.
•
Select the user type
(ADMINSTRATOR
or
SUPERVISOR)
.
•
Enter the password.
•
Finally click the “
OK
”.
A
message
“L
ogged in successfully
”
will appear on the screen after
successful login. There are two types of users viz.
ADMINISTRATOR
and
SUPERVISOR
. If user logged in as an
ADMINISTRATOR
, all
the functions can be performed through the
CMC
. By default, the
password for both users is “
SHYAM
”.
SUPERVISOR
is allowed to perform monitoring of the status & alarms
but no change in configuration is permitted.
H
owever, the
SUPERVISOR
can change password if so desired.
II) C
onfiguration
C
onfiguring system means setting the system parameters for operation
as per the requirement at site.
C
lick on the command bar to display the configuration window, which
allows access to all the configurable repeater parameters.
U
ser can login
for configuration of parameters.
•
SET
is for updating the repeater parameters.
