SHYAM Networks GS800 Series, Quick Start Manual, Page: 6 / 8

6
NETWORKS
GS800
STEP 1 Power-up GS800.
STEP 2 Default IP of the system is 192.168.1.1 . Give your system IP as 192.168.1.x
where x is any integer from 1 to 254 except 1.
i
Note : If the IP address of GS800 is 192.168.1.1 then the IP address of the system
should be other than 192.168.1.1.
STEP 3 Type the http://192.168.1.1 URL in the Internet Explorer 6.0 or above version to
access the web interface.
i
Note : The switch can be accessed once its fully boot up . During boot ALM led is ON
and SYS led is OFF.
Once the switch is booted up Alm led will be OFF and SYS led will be ON.
Now try to access the switch.
STEP 4 Provide user name as admin and password as password to access the GUI of
the GS800 web-based utility.
Please refer to “ GS800 Configuration and User Guide ” for more details.
3. Accessing the GS800 GUI