4
NETWORKS
GS800
LED Behavior
Caution and Warnings
•
Supply the appropriate DC power to the equipment. Incorrect DC power settings can
damage the equipment and may cause injury to the user.
•
Do not use the power adapter with DC output voltage higher than 57V in case of a
PoE board.
•
Make sure there is enough clearance around GS800 to allow air circulation.
•
For freestanding installation, the surface should be smooth and leveled. Attach
rubber to each corner on the bottom GS800.
•
Ensure that there is no direct exposure to heat or sunlight.
LED/BUTTON COLOR
STATUS
DESCRIPTION
PWR
Green
On
Indicates GS800 is receiving power
and is functioning properly.
Off
GS800 is not powered-up.
SYS
Green
On
GS800 is up and working.
ALM
Red
On
There is some problem such as the
fans are not working, hardware/
software errors, or others.
1G/ACT
Green
On
The corresponding port has 1 Gbps
connection.
10/100M/ACT
Yellow
On
The corresponding port has 10/100
Mbps connection.
POE/DUPLEX
Green
On
The corresponding port has POE enable
(for POE switch)
The corresponding port is in Full Duplex
mode (for NON POE switch)
Summary of Contents for GS800 Series
Page 2: ......