Seite
28
von
31
CLEANING INSTRUCTIONS
Before cleaning the device, switch off the heating panel using the ON / OFF switch on
the side of the device and let it cool down. Wait a few minutes and then pull the plug to
disconnect the device from the electrical supply.
Clean the panel with a soft, moderately damp cloth and then wipe it with a dry cloth.
Let the panel cool down completely before cleaning it.
The panel must not be immersed in or come into contact with water or other liquids.
Never use petrol, alcohol or solvents to clean the device - this could be dangerous.
Do not spray insecticides or similar agents on the panel.
Do not use in damp rooms.
DO NOT COVER - RISK OF FIRE!
ACTIVITIES AT THE BEGINNING/ END OF THE SEASON
CHECKS AT THE BEGINNING OF THE SEASON
Check whether the panel, the power cable and the socket are in good condition and
undamaged.
Follow the installation and safety instructions carefully.
ACTIVITIESS AT THE END OF THE SEASON
If you want to leave the device mounted on the wall, pull out the plug and store the
cable carefully.
While the panel is not connected to the electrical mains, you can cover the panel.
If you want to remove the device from the wall, first carefully remove the covers of the
screws and then the screws. We recommend that you always do this step in pairs.
NOTE
So that the SHX heating panel is not damaged during disassembly, we recommend
that you do it together.
Pack the device and store it in a safe, cool and dry place.