Seite
27
von
31
6. Press the
buttons to change the hours. Press the
button again to enter the
minutes using the
buttons.
7. As soon as you have entered this, confirm with
, the device now switches to
to set the end time.
8. Set this as for the start time and confirm your entry with
.
To select a different time period, please proceed as follows:
1. Select
P1
or
P2
again and confirm with
.
2. Then press the
button until , or appears on the display and pay
attention to the
and
symbols.
3. Set the desired times and confirm with.
Please note when setting the timer:
The time periods cannot be set to overlap.
The time periods cannot be set overnight from 23:00 - 1:00. Here you would have
to set a time period from 23:00 - 23:59 and then from 0:00 - 1:00.
The standard temperature you set is used as the target temperature.
The time periods cannot be deleted individually. If you want to set a new timer,
go to the desired day of the week and the desired time period and set a new timer.
SAFETY MEASURMENTS
The SHX panel is equipped with a protective device that protects the device as well as
eliminating the risk of fire.
Please note that the mechanism is not an auto-stop or any other convenience function.
Always switch off the device, pull out the power plug and wait until the panel has cooled
down before moving, cleaning or storing the device.
OVERHEATING PROTECTION
If there is any risk of overheating (e.g. cover of the device, mains overload), the built-in
overheating protection switches the device off.
As soon as the device cools down, the device automatically switches on and continues as
before.
2
3
4
