Seite 28 von 34
The time when the heater is heated and
when it is no is selected in hourly steps
with the
and the
-button.
Use the
-button to set the start
time and the
-button to set the end
time.
Examples for setting the timer:
Please note that the time to be programmed is always from 00:00 to 24:00
In order to program an operating time, the entire day must therefore always be set
- starting at 00:00 am.
Example 1.
Operating time from 6 to 9 pm:
1.
Set Start time
Starting at 00:00 push the
-button until you have reached 5pm.
2.
Set End time
Now press the
-button until you have reached 8pm.
3.
Save settings
Press the
-button until you have reached 11pm.
4. Wait until the selected day or combination stops flashing and the current time is
displayed. The timer is now active.
Example 2.
2x Operating times in one day from 9 to 1pm and from 5 to 9pm.
1. Set Start time
Starting at 00:00 am push the
-button until you have reached
8am.
2. Set End time
Now push the
-button until you have reached the time 12pm.
3. Set Start time
Push the
-button until you have reached 4pm.
4. Set End time
Push the
-button until you have reached 8pm.
5.
Save settings
Push the
- button until you have reached 11pm.
For programming on several days or combinations of days, repeat the above steps..
Start & End time
