Seite 26 von 34
4. SET FUNCTIONS
You can set all functions of the device either directly on the device, using the control panel, or
with the remote control.
1. STANDBY MODE (P)
Before you switch on the device, please
press the ON / OFF switch located on the
side of the heating panel
the device is now ready for operation, but
not switched on. The following symbols
appear on the display:
NOTE
Never switch off the heating panel by pulling the plug directly from the mains. Always press
the ON / OFF switch first before disconnecting the device from the mains.
2. SET TIME & DATE
When using the device for the first time, please set the correct date and time in (P) mode
directly on the device as follows:
SET THE DAY OF THE WEEK (MON-SUN)
Press and hold the
- button until
the desired day of the week is displayed.
SET THE HOUR (0-24)
Press and hold the
- button until the desired hour is
displayed.
SET THE MINUTES (00-60)
Press and hold the
- button until the desired minute
is displayed
3. HEATING MODE (S)
Press the
- button until the
-
symbol appears on the display:
Weekday
Mode „P“
Minute
Hour
Mode „S“
