Seite
17
von
22
2. CONTROL PANEL & REMOTE CONTROL
You can either use the remote control or use the buttons on the control panel of the device to
operate it.
When operating with the remote control, the remote must be pointed at the sensor on the
device, that proper function is guaranteed.
3. COMMISSIONING THE REMOTE CONTROL
Please
follow
instructions below.
For the
first operation
with the remote control, please pull the plastic protection out of the
battery compartment.
To
change the battery
please follow the instructions bellow:
1. Pull out the battery compartment, remove the old battery and then insert a new one:
2. Always pay attention to the polarity marking (+/-).
3. Afterwards put the battery compartment back into the remote.
Fan indicator
Low power
High power
Stand-By indicator
Temperature indicator
Swing indicator
Timer indicator
ON/OFF
MODE
Swing
Timer
