Seite
17
von
20
ACTIVITIES AT THE BEGINNING/END OF THE SEASON
AT THE END OF THE SEASON
Turn off the device and unplug it afterwards.
Pack up the appliance and store it in a cool, dry place.
AT THE BEGINNING OF THE SEASON
1. Check that the power supply cable is OK and that the socket is working properly.
2. Follow the installation and safety instructions carefully.
TROUBLESHOOTING
Problem
Behebung
The operating display does not light up or
the heating does not heat.
Check whether the device is connected to
electricity.
Check whether the main switch is set to "I".
The operating display does not light up.
Check whether the heating has cooled
down sufficiently and make sure that the
device is not overheated.
Switch off the device using the main
switch on the backside of the heater and
pull the power supply cable out of the
socket. Switch the device on again after
10 minutes.
The operating indicator lights up but the
device does not heat.
Check whether the room temperature is
higher than 2 ° C above the set
temperature, otherwise the fan heater will
not heat.
There is not enough air in the heating.
Check whether the air inlet on the back of
the device is blocked by dust or other
objects and remove them if necessary.
