Seite
15
von
20
DESCRIPTION OF THE DEVICE
START UP
The installation and operation of the SHX fan heater is very quick and uncomplicated:
1. INSTALLATION
1. Remove the packaging.
2. Make sure the device is not damaged.
3. Unwind the cord and make sure it is not damaged.
4. Place the device on a stable, flat surface that is insensitive to heat.
5. Insert the plug into a suitable socket.
6. Now press the main switch on the back of the device
„
“ to power the
device.
2. SET FUNCTIONS
ON/OFF
Push
, to turn the heater on and off. When you turn the heater off, the device
stops the heating process, but it still ventilates for about 20 seconds.
TEMPERATUR
Use the
-button to increase and the
-button to decrease the desired
temperature.
SET THE HEATING MODE
Push the
-button as follows, to set the heating mode:
Push 1x = Low heating mode (Indicators light up red)
Push 2x = High heating mode (Indicators light up red)
Push 3x = Cooling mode (Indicators light up blue)
TIMER
When the device is in operation, you can set the timer, so that the heating is
switched off automatically after the set time.
To do this, press and hold the
button for 3-5 seconds to switch to timer mode.
