Shuttle XPC SK21G, User Manual

Page: 3 / 72

(
C) Remedy for the Tested Product & Its EMI Interference:
Remedy: N/A
EMI Interference:
Crystal : 32.768 KHz(X1)/ 25 MHz(X2)/ 24.576 MHz(X2)/ 14.318 MHz(X1)
(D) Supported Host Peripherals:
Host Peripheral Product Name Model Name
# 1 Case SK21G
# 2 Power Supply PC30I2003
# 3 Serial ATA Seagate ST3120U26AS
# 4 Card Reader PC22
# 5 DVD Dual Player DVR-A09XLA
# 6 DDR Kingstone KVR400X64C25/256*2
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI or AGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.