- 14 -
Mic-In
MIC-IN is a 1/8-inch jack that provides a mono input. It can use a dynamic mono or stereo
microphone with a resistance of not more than 600 ohms.
GAME/MIDI
The GAME/MIDI port is a 15-pin female connector. This port can be connected to any IBM
PC compatible game with a 15-pin D-sub connector.
MIDI Instrument Connection
You need a MIDI adapter to connect a MIDI instrument to the sound card. The MIDI adapter
can be connected to the Joystick/MIDE port. You will also need MIDI sequencing software to
run MIDI instruments with your computer.
Figure 2-7
Figure 2-8
Figure 2-9
Other Connectors
ATX Power Supply Connector - J4
It is a 20-pin male header connector is connected to the ATX
power supply. The plug of the power supply will only insert
in one orientation because of the different hole shade and
size. Find the proper orientation and push down firmly
making sure that the pins are aligned.
IR Connector - J3
If you have an Infrared device, this mainboard can implement
IR (Infrared) transfer and meet both ASKIR and HPSIR speci-
fications. To enable the IR transfer function, follow these steps:
Step 1.
Attach the 5-pin infrared device cable to J3
connector. (Refer to the above diagram for IR pin
assignment.)
Step 2.
Configure the Infrared transfer mode in the
UR2 Mode field of Integrated Peripherals menu
in BIOS Setup. This mainboard supports IrDA
1.0, ASKIR, MIR 0.57M and MIR 1.15M trans
fer modes. FIR is not currently supported.
