- 16 -
Wake-On-LAN Connector - J11
Attach a 3-pin connector from the LAN card which supports the Wake-On-LAN (WOL)
function. This function lets users wake up the connected system
through the LAN card.
Enhanced IDE and Floppy connectors
The mainboard features two 40-pin dual-channel IDE device connectors (IDE1/IDE2)
providing support for up to four IDE devices, such as CD-ROM and Hard Disk Drivers
(H.D.D.). This mainboard also includes one 34-pin floppy disk controller (FDC) to accom-
modate the Floppy Disk Drive (F.D.D.).
This mainboard comes with one 40-pin ribbon cable to connect to IDE H.D.D and one 34-pin
ribbon cable for F.D.D.
Ribbon cables are directional, therefore, make sure to always
connect with the red cable-strip on the same side as pin #1 of
the IDE1/IDE2 or FDC connector on the mainboard.
SB-Link connector - JP7
The main board provides a 2x3 pin SB-Link header accepts the Creative CT4600 series PCI
sound cards with PCI solution to connect the legacy Sound Blaster compatible audio to the
PCI bus.
Figure 2-11
