- 70 -
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to
enter the Soft-Off state when the system has "hung.".
Ø
The choice: Instant-Off or Delay 4 Sec.
Run VGABIOS if S3 Resume
This item Enable/Disable VGA BIOS execution when resume from S3.
It's for some legacy AGP driver compatibility.
Ø
The choice: Auto, Yes, or No.
PWRON After PWR- Fail
This allows you to set whether you want your system to reboot after
power has been interrupted.
Ø
The choice: Off, On, or Former-Sts.
IRQ/Event Activity Detect
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
VGA
When this item enabled, you can set VGA to awaken the system.
Ø
The choice: OFF or ON
LPT & COM
When LPT & COM stays On, any activity from one of the listed system
peripheral devices or IRQs wakes up the system.
Ø
The choice: NONE, LPT, COM, or LPT/COM
HDD & FDD
When HDD & FDD stays On, any activity from one of the listed system
peripheral devices wakes up the system.
Ø
The choice: OFF or ON
PCI Master
When PCI Master stays On, any activity from one of the listed system
peripheral devices wakes up the system.
Ø
The choice: OFF, or ON
PowerOn by PCI Card
This item enables/disables the power on function of PCI Card.
Ø
The choice: Disabled or Enabled.
Wake Up On LAN/Ring
When this item enabled, any event occurring Modem Ring/activity of
LAN will awaken a system which has been powered down.
Ø
The choice: Disabled or Enabled.
