- 41 -
3.3 System Memory Configuration
The AV45GT/AV45GTR mainboard has three 184-pin DIMM banks that
allow you to install from 64MB up to 3GB of system memory.
Each
184-pin
DIMM (Dual In-line Memory Module) bank can accommodate
64MB, 128MB, 256MB, 512MB, and 1GB of PC1600/PC2100 compliant
2.5V single or double side 64-bit wide data path DDR SDRAM modules.
DIMM slots are arranged in three banks, each memory bank made of one
bank and providing a 64-bit wide data path.
1. Install Memory:
Install memory in any or all of the banks. The combination shown as follows.
Maximum installed memory is 3GB.
Note:
You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
2. Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR
SDRAM modules in available DIMM banks. The total system memory is
calculated by simply adding up the memory in all DIMM banks After up-
grade, the new system memory value will automatically be computed and
displayed in the field "Standard CMOS Setup" of BIOS setup program.
DIMM
Slot
Memory Modules
Module
Quantity
DIMM 1
64MB, 128MB, 256MB, 512M and 1GB
, 184
-pin
2.5
V DDR SDRAM DIMM
x 1
DIMM 2
64MB, 128MB, 256MB, 512M and 1GB
, 184
-pin
2.5
V DDR SDRAM DIMM
x 1
DIMM 3
64MB, 128MB, 256MB, 512M and 1GB
, 184
-pin
2.5
V DDR SDRAM DIMM
x 1
