Shuttle Spacewalker AV30 User Manual Download Page 46

Page: 46 / 89

- 44 -

4.3 Install Audio Device Software

Insert the attached CD into your CD-ROM drive, and the CD AutoRun screen
should appear. If the AutoRun screen does not appear, double click on
Autorun icon in

My Computer

to bring up

Shuttle Mainboard Software

Setup

screen.

Select the item using your pointing device (e.g. mouse) on the “

Install Audio

Device Software

” bar.

Then

AC97 Audio Drivers

windows will appear on your screen. Click on the

“

Install AC97 Sound Driver

” bar to install Audio driver.

Once you make your selection, a Setup window will automatically runs the

installation.

When the files are done copying, make sure you

reboot

the system to insure

that the files are installed correctly.

Summary of Contents for Spacewalker AV30


























































































Search results

Summary of Contents for Spacewalker AV30

Reviews:

Related manuals for Spacewalker AV30

Brands by name

Popular brands

Shuttle Spacewalker AV30, User Manual

Search results

Summary of Contents for Spacewalker AV30

Reviews:

Related manuals for Spacewalker AV30

Brands by name

Popular brands