- 37 -
#$
#$
#$
#$
#$
Other Connectors
ATX Power Supply Connector (CN10)
Locate the 20-pin male header ATX power connector (CN10) on your
mainboard. Plug the power cable from the ATX power supply unit directly
into CN10 ATX power supply connector.
Note 1:
The ATX power connector is directional and will not go in unless the
guides match perfectly making sure that pin#1 is properly positioned.
Note 2:
Make sure the latch of the ATX power connector clicks into place to
ensure a solid attachment.
Note 3:
Your ATX power supply must be supplied to ACPI +5V standby power
and at least 720mA compatible.
Note 4:
Make sure your power supply have enough power for higher speed
processor installed.
Cooling Fan Connectors for CPU FAN (FAN1), SYSTEM FAN
(FAN2), and AGP FAN (FAN3)
The mainboard provides three onboard 12V cooling fan power connectors
to support CPU FAN (FAN1), SYSTEM FAN (FAN2), and AGP(FAN3) cooling
fans.
E1
E2
Note:
Both cable wiring and type of
plug may vary depending on
the fan maker. Keep in mind
that the red wire should always
be connected to the +12V
header, and the black wire, to
the ground (GND) header.
SENSE
GND
+12V
1
FOR CPU
1
FAN1
FOR AGP
1
FAN3
FOR SYSTEM
1
FAN2
ATX PWR CON
CN10
FAN1, FAN2 with rotate sense.
FAN3 without rotate sense.
