- 32 -
#
#
#
#
#
Front-Panel Connectors
ATX Power On/Off Switch Connector (PWR ON)
The Power On/Off Switch is a momentary- type switch used for turning on or off
the system’s ATX power supply. Attach the connector cable from the Power
Switch to the 2-pin PWR ON header on the mainboard.
EPMI Connector (EPMI)
Hardware System Management Interface (EPMI) header may attach to a 2-pin
momentary switch. Press the EPMI switch to force the system into power saving
mode; press again to resume normal operation.
Green LED Connector (GLED)
The Green LED (GLED) indicates that the system is currently in one of the power
saving mode (Doze/Standby/Suspend). When the system resumes to normal
operation mode, the Green LED will go off. Attach a 2-pin Green LED cable to
GLED header.
Note :
Please note the Speaker
and all the LED connectors
are directional.
If your chassis’s LED does
not light up during running,
please simply change to the
opposite direction.
C2
C1
C3
RST HLED
PLED
+ -
+ - + -
SPEAKER
GLED EPMI PWR ON
1
JP11
RST HLED
PLED
+ -
+ - + -
SPEAKER
GLED EPMI PWR ON
1
JP11
RST HLED
PLED
+ -
+ - + -
SPEAKER
GLED EPMI PWR ON
1
JP11
