- 37 -
SIR/CIR Connector (JP4)
If you have an Infrared device, this mainboard can implement SIR (Standard
IR) and CIR (Cirsumer IR) transfer function. To enable the IR transfer func-
tion, follow these steps:
Pins Assignment:
1=+5V
2=CIRRX 3=IRRX
4=GND
5=IRTX
Note:
Before connect your IR device, please be sure each IR on board pin
allocation is matchable with the pin of the IR device. Otherwise,
incorrect IR connection may do damage to your IR device.
Step 1.
Attach the 5-pin infrared device cable to JP4 connector.
(Refer to the above diagram for IR pin assignment.)
Step 2.
Configure the Infrared transfer mode in field "UART Mode Select"
of "Super IO Device" of "Integrated Peripheral" sub-menu in
BIOS setup program. This mainboard supports IrDA, ASKIR,
Normal transfer modes.
Wake-On-LAN Connector (JP6)
Attach a 3-pin connector through the LAN card which supports the Wake-On-
LAN (JP6) function. This function lets users wake up the connected system
through the LAN card.
Pins Assignment:
1=Power
2=GND
3=RING#
E3
E4
5 4 3 2 1
3 2 1
JP4
IR
1
JP6
1
