- 59 -
RAID & SCSI Boot Order
The item select RAID and SCSI boot order.
Ø
The Choice: RAID, SCSI or SCSI, RAID.
Hard Disk Boot Priority
The item select Hard Disk Boot device priority.
Ø
The Choice: HDD-0, HDD-1, HDD-2, HDD-3, HDD-4, or HDD-5.
First/Second/Third Boot Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items.
Ø
The Choice: Floppy, LS120, Hard Disk, CDROM, ZIP100, LAN, or
Disabled.
Boot Other Device
Select Your Boot Device Priority.
Ø
The choice: Enabled or Disabled.
Swap Floppy Drive
If the system has two floppy drives, you can swap the logical drive
name assignment.
Ø
The choice: Enabled or Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot-Up. Disabling speed boots up.
Ø
The choice: Enabled or Disabled.
Boot Up NumLock Status
Selects power-on state for NumLock.
Ø
The choice: Off or On.
Gate A20 Option
This entry allows you to select how the gate A20 is handled. The gate
A20 is a device used for above 1MByte of address memory. Initially,
the gate A20 was handled via a pin on the keyboard. Today, while a
keyboard still provides this support, it is more common and much faster
in setting to Fast for the system chipset to provide support for gate A20.
Ø
The choice: Normal, or Fast.
