- 39 -
E1
F
Other Connectors
ATX Power Supply Connector (CN7, JP12, and JP13)
This motherboard uses 20-pin Pentium 4 standard ATX power header,
CN7 and comes with another two headers.
One is JP12 with 6-pin Aux Vcc/Vcc3 ATX power supply header.
Another is JP13 with 2X2-pin +12 V ATX power supply header.
Please make sure you plug in the right direction.
Note 1:
The ATX power connector is directional and will not go in unless the guides
match perfectly making sure that pin#1 is properly positioned.
Note 2:
Make sure the latch of the ATX power connector clicks into place to ensure a
solid attachment.
Note 3:
Your ATX power supply must be supplied to ACPI +5V standby power and
at least 720mA compatible.
Note 4:
Make sure your power supply have enough power for higher speed processor
installed.
CN7
JP12
JP13
J P 13
ATX12V
AU
X P
W
R
AT
X PW
R
CN7
JP
1
2
