- 10 -
!
!
!
!
!
PCI Bus Master IDE Controller Onboard
Two Ultra DMA
100/66/33
Bus Master Dual-channel IDE ports provide sup-
port to a maximum of four IDE devices (one Master and one Slave per channel).
The IDE Bus implements data transfer speeds of up to
100/66/33
MB/sec and
also supports Enhanced PIO Modes 0~4.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.
!
!
!
!
!
ATX Power Supply Connector
ATX power supply unit can connect to the onboard 20-pin ATX power
connector, supporting Suspend and Soft-On/Off by dual-function power
button.
!
!
!
!
!
Advanced Configuration and Power Interface
Features four power saving modes: S1 (Snoop), S3 (Suspend to RAM), and S5
(Soft-Off). ACPI provides more efficient Energy Saving Features controlled by
your operating system that supports OS Direct Power Management (OSPM)
functionality.
!
!
!
!
!
System BIOS
Provides licensed Award BIOS V6.0 PG on Intel Firmware Hub 4Mb Flash
core and supports Green PC, Desktop Management Interface (DMI).
!
!
!
!
!
MicroATX Form Factor
System board conforms to the MicroATX specification.
Board dimensions: 245mm × 215mm.
!
!
!
!
!
Advanced Features
"
Low EMI --
Built in spread spectrum and automatic clock shut-off of
unused PCI/SDRAM slots to reduce the EMI.
"
PS/2 Keyboard & PS/2 Mouse Power-On -
This mainboard implements a
special jumper to enable a system power-on function by PS/2 keyboard &
PS/2 mouse.
"
Dual Function Power Button -
The system can be in one of two states,
one is Suspend mode and the other is Soft-Off mode. Pushing the power
button for less than 4 seconds places the system into Suspend mode.
When the power button is pressed for longer than 4 seconds, the system
enters the Soft-Off mode.
