10
Install the Heat Sink Support:
Before you install the Heat Sink Support, please check your Pentium II processor, if you have
an Intel boxed processor ( Refer to Figure 2-11), you can ignore this section. In Intel boxed
processor kit, it will includes it's own Heat Sink Support accessories and install manual, you
can Install the Heat Sink Support onto the mainboard by following the Intel processor kit's
instructions.
Figure 2-12 shows the OEM type Pentium II processor with active heat sink.
1. Finds out the Heat Sink Support (HSS)
Mounting Holes on HOT-637 main
board. Notice that one hole is larger than
the other hole.
2. There are two plastic pegs on the
bottom of Heat Sink Support Base
(HSSBASE) bar. Mount the two black
plastic pegs onto the mainboard. Notice
that one hole and the bar of one peg are
larger than the other hole and peg. (Refer
to Figure 2-13)
3. Insert the Heat Sink Pins (HSSPIN)
through the HSSBASE to secure it to the
mainboard. (Refer to Figure 2-13)
4. Insert the Pentium II into the RM
firmly (Please refer to "Install Pentium II
processor" section), Slide the Heat Sink
Top Bar (HSSTOP) on the supports
forward to clip onto the HSSBASE
through the fins of Heat Sink. (Refer to
Figure 2-14)
Figure 2-11
Figure 2-12
Figure 2-13
Figure 2-14
