13
IGA1680 PCI VGA
Procedure
1 .
Power off the computer and disconnect the monitor cable.
2 .
Remove the computer cover. If necessary, consult your system manual for removal instruc-
tions.
3 .
Make sure the jumper setting and memory configuration are correct.
4 .
Select an empty PCI expansion slot for the HOT-137/HOT-139. With the slot cover removed,
grasp the card by the top edge and carefully seat it firmly into the slot. Fasten the retaining
bracket with a screw.
5 .
Reinstall the computer cover.
6 .
Connect the monitor cable to the Video Output connector of the PCI VGA card.
WARNING !!
Damage to system components, the display adapter, and injury to yourself may result
if power is applied during installation.
If the system successfully powers up and the normal DOS boot-up message appears on the screen, the
HOT-137/HOT-139 is installed properly. If the system does not boot, there are a few things you can
check in following "Hardware Troubleshooting".
