- 8 -
Ø
1 x PS/2 Mouse
Ø
1 x PS/2 Keyboard
Ø
1 x Center/Bass-Out port
Ø
1 x Rear-Out port
Ø
1 x Line-Out port
-
PCI Bus Master IDE Controller Onboard
Two ultra DMA 133 bus master dual-channel IDE ports support up to four IDE
devices (one Master and one Slave per channel).
The IDE bus implements data transfer speeds to 133/100/66/33MB/sec and sup-
ports enhanced PIO modes.
80-pin cable backward compatible legacy ATAPI devices, ATAPI IDE CD-ROM,
CD-R, CD-RW, and LS-120 supports.
-
ATX Power Supply Connector
ATX power supply unit can be connected to the onboard 20-pin ATX power
connector, and 4-pin ATX power connector. The unit supports Suspend and
Soft-On/Off modes by the dual-function power button.
-
Advanced Configuration and Power Interface
Features four power-saving modes: S1 (Snoop), S3 (Suspend to RAM), S4
(Suspend to DISK), and S5 (Soft-Off). ACPI provides more efficient energy-
saving features controlled by your operating system that supports OS Direct
Power Management (OSPM) functionality.
-
System BIOS
Provides licensed Award BIOS V6.0 PG on the 2Mb Flash ROM, and sup-
ports Green PC, Desktop Management Interface (DMI).
-
Form Factor
System board conforms to the Flex ATX specification.
Board dimension: 254mm x 185mm.
-
Advanced Features
Ø
Low EMI - Built in spread spectrum. Unused PCI/SDRAM slots are shut off
by the automatic clock for reducing EMI.
Ø
Dual Function Power Button - The system can be in any of the two
states: one is Suspend mode and the other is Soft-Off mode. Pushing the
