- 28 -
F
Back-Panel Connectors
COM1 Port
This mainboard can accommodate one serial device on COM1.
Attach a serial device cable to the DB9 serial port COM1 at the back-panel of
your computer.
Clear CMOS Button
This button is used to clear CMOS data.
You can clear CMOS without
opening the chassis. It's a very
friendly button.
1394 Port
This mainboard offers one
1394 port on back-panel. Plug
device jack into an available
1394 port.
PS/2 Keyboard & PS/2 Mouse Ports
Two 6-pin female PS/2
keyboard & Mouse co-
nnectors are located at
the rear panel of the
mainboard.
Depending on the computer housing you use (desktop or tower), the PS/2
Mouse port is situated at the top of the PS/2 Keyboard port when the main-
board is laid into a desktop, as opposed to a tower where the PS/2 Mouse
port is located at the right of the PS/2 Keyboard's. Plug the PS/2 keyboard and
mouse jacks into their corresponding ports.
A1
A2
A4
A3
A1
COM1 Port
Clear CMOS Button
1394 Port
PS/2 Keyboard
PS/2 Mouse
A5
