- 50 -
Halt On
Select the situation in which you want the BIOS to stop the POST
process and notify you.
Ø
The choice: All Errors, No Errors, All, But Keyboard, All, But Diskette,
or All, But Disk/Key.
Base Memory
Displays the amount of conventional memory detected during boot up.
Ø
The choice: N/A.
Extended Memory
Displays the amount of extended memory detected during boot up.
Ø
The choice: N/A.
Total Memory
Displays the total memory available in the system.
Ø
The choice: N/A.
******************************************************
IDE Adapters
The IDE adapters control the hard disk drive. Use a separate sub-menu
to configure each hard disk drive.
IDE HDD Auto-Detection
Press <Enter> to auto-detect HDD on this channel. If detection is
successful, it fills the remaining fields on this menu.
Ø
Press Enter
IDE Channel 0/2/3 Master/Slave
Selecting 'manual' lets you set the remaining fields on this screen and
select the type of fixed disk. "User Type" will let you select the number
of cylinders, heads, etc., Note: PRECOMP=65535 means NONE !
Ø
The choice: None, Auto or Manual.
Access Mode
Choose the access mode for this hard disk.
Ø
The choice: CHS, LBA, Large or Auto.
Capacity
Disk drive capacity (Approximated). Note that this size is usually
slightly greater than the size of a formatted disk given by a disk check-
ing program.
Ø
Auto-Display your disk drive size.