- 51 -
Typematic Rate Setting
If this item is enabled, you can use the following two items to see the
typematic rate and the typematic delay settings for your keyboard.
Ø
The choice: Enabled or Disabled.
Typematic Rate (Chars/Sec)
This item sets how many times the keystroke will be repeated in a
second when you hold a key down.
Ø
The choice: 6, 8, 10, 12, 15, 20, 24, or 30.
Typematic Delay (Msec)
Sets the delay time after a key is held down.
Ø
The choice: 250, 500, 750, or 1000.
Security Option
If you have installed password protection, this item defines if the pass-
word is required at system start up, or if it is only required with a user
tries to enter the Setup Utility.
Ø
The choice: Setup or System.
APIC Mode
This option shows APIC (Advanced Programmable Interrupt Controller)
functionality only. The APIC is an Intel chip that provides symmetric
multiprocessing (SMP) for its Pentium system.
MPS Version Control For OS
Selects the operating system multiprocessor support version.
Ø
The choice: 1.1 or 1.4
OS Select For DRAM > 64MB
This item is only required if you have installed more than 64 MB of
memory and you are running the OS/2 operating system. Otherwise,
leave this item at the default.
Ø
The choice: Non-OS2 or OS2.
Report No FDD For WIN 95
Whether report no FDD runs for Win 95 or not.
Ø
The choice: Yes or No.
Small Logo(EPA) Show
This item allows you to enable or disable the EPA Logo.
Ø
The choice: Enabled or Disabled.
