- 29 -
F
Front Panel Connectors
HDD LED Connector (HLED)
Attach a connector cable from the IDE device LED to the 2-pin (HLED) header.
The HDD LED lights up whenever an IDE device is active.
Note : Please notice all the LED connectors are directional. If your chassis's
LED does not light up during running, please change it to the oppo-
site direction.
Green LED/Power LED Connector (GLED/PWR_LED)
This header is dual color LED function. Dual color LED function is defined by
either Green LED or Power LED, the header can be in these states. The Green
LED indicates that the system is currently in one of the power saving mode
(Doze/Standby/Suspend). When the system resumes to normal operation mode,
the Green LED will go off, the Power LED on. The Power LED will go off during
power saving mode. Attach a 2-pin Green LED/Power LED cable to (GLED/
PWR_LED) header.
C2
C1
JP13
1
-
+HLED
RST
GLED /
PWR_LED
-
+
-
+
PWON
JP13
1
-
+HLED
RST
GLED /
PWR_LED
-
+
-
+
PWON
