Page 4
STEP 2
ATTACHING THE WOBBLE BOARD
ITEMS
REQUIRED
WOBBLE
BOARD
KNURLED
KNOBS BAG
1. Place the Wobble Board in the middle of the Frame. Remove the zip-tie and parts bag with
four knurled knobs and four steel/rubber washers from the Wobble Board. (Pic 2.1)
2. Detach four chain carabiners (two on each side) from the eyebolts on the Wobble Board
and attach them to the eyebolts on the Handrails. (Pic 2.2)
3. Remove each carabiner attached to the black control rope from the eyebolts on the Wobble
Board. Attach the top carabiner of the control ropes to the corresponding eyebolt located
on the side of the Handrail Frame. Insert the eyebolt into and through the middle of the
frame. Tighten down the eyebolt with a Steel/Rubber Washer and Knurled Knob. Attach the
last remaining carabiner on the black control ropes to the bottom eyebolt of the frame. (Pic
2.3 & 2.4)
4. Detach the red elasticord carabiners from each other. Attach them to the bottom eyebolts
on the frame. The elasticords and control ropes should both be attached to the bottom
eyebolt of the frame. Remove the protective packaging from the Wobble Board. (Pic 2.5)
Pictures are on the next page
