- 64 -
IR Transmission Delay
This item enables/disables the delay of the IR state change from Rx to Tx
mode or Tx to Rx mode.
Ø
The choice: Enabled or Disabled.
UR2 Duplex Mode
This item allows you to selects the IR half/full duplex function.
Ø
The choice: Full or Half.
Use IR Pins
This item allows you to select IR I/O Pins location.
RxD2, TxD2 - Through SINB/SOUTB.
IR-Rx2Tx2 - Through IRRX/IRTX.
Ø
The choice: RxD2, TxD2 or IR-Rx2Tx2.
Onboard Parallel Port
This item allows you to determine onboard parallel port controller I/O
address setting.
Ø
The choice:: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, or Disabled.
Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port. Select
Normal, Compatible, or SPP unless you are certain your hardware and
software both support one of the other available modes.
Ø
The choice: SPP, EPP, ECP, or ECP+EPP.
EPP Mode Select
This item selects the EPP Mode.
Ø
The choice: EPP1.7 or EPP1.9.
ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP mode.
Ø
The choice: 1 or 3.
Game Port Address
This item selects Game Port Address.
Ø
The choice: Disabled, 201, or 209.
Midi Port Address
This item selects Midi Port Address.
Ø
The choice: Disabled, 330, 300, or 290.
