Shuttle AK32E User Manual Download Page 46

Page: 46 / 81

- 42 -

4 SOFTWARE UTILITY

4.1 Mainboard CD Overview

Note: The CD contents attached in the AK32E mainboard are subject to

change without notice.

To start your mainboard CD disc, insert it into your CD-ROM drive, and
the CD AutoRun screen should appear. If the AutoRun screen does not
appear, double click or run D:\Autorun.exe (assuming that your CD-ROM
drive is drive D:)

Navigation Bar Description:

Install Mainboard Software - Installing 4 in 1drivers.

Install Audio Device Software - Installing Audio driver.

Install USB2.0 Driver - Installing USB2.0 driver.

Manual - AK32E series mainboard user's manual in PDF format.

Link to Shuttle Homepage - Link to shuttle website homepage.

Browse this CD - Allows you to see the contents of this CD.

Quit - Close this CD.

Summary of Contents for AK32E


















































































Search results

Summary of Contents for AK32E

Reviews:

Related manuals for AK32E

Brands by name

Popular brands

Shuttle AK32E, User Manual

Search results

Summary of Contents for AK32E

Reviews:

Related manuals for AK32E

Brands by name

Popular brands